Price: $466.46
(as of Jan 17,2023 08:15:25 UTC – Details)
How to Use:
1. Align the 5 pairs of impeller holes on the blade with the holes on the hub, place the pressure plate to screw in the hex screw (no need to tighten).
2. Screw all put after tightening with hexagonal wrench (5 blades installation method is the same) .
3. Connect the two wires of the wind turbines to the transmission cable, the red wire to the positive pole, the blue wire to the negative pole, and tie the connection end 100 mm with tape.
4. Put the wind turbines on the tower pole, and tighten the screws.
5. Connect the cable from the wind turbines to the battery, with the red wire connected to the positive pole and the blue wire connected to the negative pole.
Specification:
Item Type: Wind Generator
Material: Nylon fiber, aluminum alloy, stainless steel
Weight: Approx. 10250g/361.56oz
Single Blade Size: 60x37cm/23.62×14.57in
Controller Voltage: 12V 24V (automatic identification)
Controller Protection Level: IP67
Installation Method: Flange installation
Blade Number: 5 pieces
Rated Wind Speed: 11m/s
Safety Wind Speed: 45m/s
Generator: Three phase AC permanent magnet synchronous generator
Adjustment Mode: Wind angle automatic adjustment
Scope of application: Suitable for home, ship, marine, monitoring use, solar and wind energy hybrid system.
Package List:
5 x Wind Generator Blade
1 x Wind Generator Cap
1 x Retainer
1 x Flange
1 x Mounting Plate
1 x Generator Controller
1 x Hex Wrench
50 x Accessories
2 x Instruction Manual
【HIGH WIND ENERGY UTILIZATION】The wind blades are made of reinforced fiber nylon, which is more durable and has strong wind resistance. Especially optimized aerodynamic shape and structural design for high wind energy utilization. The wind generator can start in light wind and adapt to 360 degree wind without yawing system.
【3 PHASE PERMANENT MAGNET】3 phase permanent magnet alternator can effectively reduce the resistance torque of wind generator. It also makes the wind turbines and generator match better and work more reliably and then running more reliability.
【5 BLADES AND FLANGED MOUNTING】Equipped with 5 double shaft vertical blades for high security which looks like a Gourd. Because the blades are fixed inside by flanges, there is no danger of blades falling off. An environmentally friendly and low carbon emission way.
【EASY INSTALLATION】Vertical shaft wind generator can use helical pile foundations. Compared to concrete installation, it saves cost and is easy and fast to install. Helical pile bases can be fully recycled at the end of their service life. An environmentally friendly and low carbon approach.
【QUIET ROTATION】Vertical wind turbines are quieter than horizontal shaft turbines. Double bearings make the wind generator more stable and less prone to shaking when working. Silent rotation, suitable for home, boat, marine, monitoring use, solar and wind hybrid street lighting system.